Jamstvo : 24 mjeseca , Features
– Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards
– Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port
– IEEE 802.3x full duplex flow control and back pressure in half duplex eliminate packets loss
– Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port
– Auto-detect PoE IEEE 802.3af equipment; protects devices from being damaged by incorrect installation
– 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm)
– DIP-switch: LFP (Link Fault Pass-through) mode selection
– Compact in size, easy to install
– LED indicators for easy network diagnostics
Specifications
INTERFACE
– Copper: 1-port Fast Ethernet TP interface, auto negotiation, auto-MDI / MDI-X with PoE injector function
– Fiber: Multi-mode: 50/125µm or 62.5/125µm optical fiber
– Fiber Port Type (connector): SC
– Cable Distance: 2km
– Optical Frequency: 1310nm
– Launch Power: max.-14 min.-19.0 dBm
– Receive Sensitivity: -34.5
– Maximum Input Power: -14
POWER OVER ETHERNET
– PoE Standard: IEEE 802.3af Power over Ethernet
– Power Output: PoE 48V DC, max. 15.4 watts, 350mA
– Power Pin Assignment: 1/2(+) , 3/6(-)
HARDWARE
– Switch Architecture: Store-and-Forward
– Flow Control:
* Back pressure for half duplex mode
* IEEE 802.3x pause frame for full duplex mode
– LED:
* System: Power, Status
* FX / LNK: Data Active, Fiber Link
* TX / LNK: 10/100 Link / Active
* PoE in Use: Detects PSE Device
– Dimensions (H×W×D): 26×70×97 mm
– Weight: 0.2 kg
– Power Supply: 48V DC, 0.4A external AC-to-DC adapter
– Operating Temperature: 0 – 50 degrees C
– Operating Humidity: 5 – 90% (non-condensing)
– LFP Mode:
* Enable: when either TP port or FX port is broken, shut down the other port
* Disable: Link LED indicators is still on if connection of the other end is broken
STANDARD CONFORMANCE
– Protocols and Standards Compliance:
* IEEE 802.3 Ethernet
* IEEE 802.3u Fast Ethernet
* IEEE 802.3x Flow Control
* IEEE 802.3af Power over Ethernet
– Cables:
* TP: Cat 5/5e UTP cable
* Fiber: Multi-mode: 50/125µm or 62.5/125µm optical fiber
* Single-mode: 8.3/125, 8.7/125, 9/125µm optical fiber
